SKAPS TRANSNET (TN)
HDPE Geonet/Geotextile Composite

SKAPS Transnet geocomposites typically consist of SKAPS GeoNet with nonwoven polyproplyne geotextile fabric heat-bonded to one or both sides. The geotextile serves as a filter to prevent the geonet from clogging while the geonet provides a path for fluids (liquids and gases). Geocomposites may also be used as a cushion to protect a geomembrane from unduly rough substrates. SKAPS TransNet is designed specifically for use in situations where high normal loads are expected, such as in landfill cell design.

TN 220

TESTED PROPERTY	TEST METHOD	MINIMUM AVERAGE VALUES¹
		with 6 oz.	with 8 oz.	with 10 oz.

Transmissivity³, m²/sec	ASTM D 4716	1x10^-4	1x10^-4	1x10^-4
Ply Adhesion, lbs.	ASTM D 413	1.0	1.0	1.0
Roll Width, ft.		14	14	14
Roll Length, ft.		300	300	300

Net Properties ²
Polymer Density, g/cm²	ASTM D 1505	0.94	0.94	0.94
Carbon Black Content, %	ASTM D 1603	2.0	2.0	2.0
Thickness, mil	ASTM D 5199	200	200	200
Mass per Unit Area, lbs./ft²	ASTM D 5261	0.162	0.162	0.162
Tensile Strength, lbs./in.	ASTM D 5035	50	50	50
Transmissivity², m²/sec	ASTM D 4716	1x10^-3	1x10^-3	1x10^-3

Geotextile Properties		GE160	GE180	GE110
Fabric Weight, oz.	ASTM D 3776	6.0	8.0	10.0
Grab Tensile, lbs.	ASTM D 4632	160	225	270
Puncture, lbs.	ASTM D 4833	95	130	165
Water Flow Rate. gpm/ft²	ASTM D 4491	130	100	75
AOS, US, sieve	ASTM D 4751	70	80	100