|
|
SKAPS TRANSNET (TN)
HDPE Geonet |
SKAPS Transnet geocomposites
typically consist of SKAPS GeoNet made from HDPE resin. SKAPS Transnet is
designed specifically for use in situations where high normal loads are
expected, such as in landfill design. |
| TN 270 |
|
|
|
| TESTED PROPERTY |
TEST METHOD |
MINIMUM
AVERAGE VALUES1 |
| Net
Properties |
|
|
| Polymer
Density, g/cm2 |
ASTM D 1505 |
0.94 |
| Carbon Black Content,
% |
ASTM D
1603 |
2.0 |
| Thickness,
mil |
ASTM D 5199 |
250 |
| Mass per Unit Area,
lbs./ft2 |
ASTM D
5261 |
0.256 |
| Tensile
Strength, lbs./in. |
ASTM D 5035 |
50 |
| Transmissivisity2, m2/sec |
ASTM D
4716 |
2x10-3 |
|
| 1.
These values represent minimum acceptable test values for an individual roll as
tested according to SKAPS Manufacturing Quality Control Manual. Individual test
specimen may vary.
2. Transmissivity measured using
water at 20° C at a gradient of 0.1, under confining pressure of 10,000 psf,
between stainless steel plates. Values may vary between individual
laboratories.
This information is provided for
reference purposes only and is not intended as a warranty or guarantee. SKAPS
assumes no liability in connection with the use of this information. Check with
SKAPS for current, standard minimum quality assurance
procedures. |
| |
