|
|
|
|
|
|
edit
|
|
| TN 220 |
 |
|
|
|
|
|
|
|
|
| TESTED PROPERTY |
TEST METHOD |
MINIMUM AVERAGE VALUES1 |
|
|
with 6 oz. |
with 8 oz. |
with 10 oz. |
|
|
|
|
|
| Transmissivity3, m2/sec |
ASTM D 4716 |
1x10-4 |
1x10-4 |
1x10-4 |
| Ply Adhesion, lbs. |
ASTM D 413 |
1.0 |
1.0 |
1.0 |
| Roll Width, ft. |
|
14 |
14 |
14 |
| Roll Length, ft. |
|
300 |
300 |
300 |
|
| Net Properties 2 |
|
| Polymer Density, g/cm2 |
ASTM D 1505 |
0.94 |
0.94 |
0.94 |
| Carbon Black Content, % |
ASTM D 1603 |
2.0 |
2.0 |
2.0 |
| Thickness, mil |
ASTM D 5199 |
200 |
200 |
200 |
| Mass per Unit Area, lbs./ft2 |
ASTM D 5261 |
0.162 |
0.162 |
0.162 |
| Tensile Strength, lbs./in. |
ASTM D 5035 |
50 |
50 |
50 |
| Transmissivity2,
m2/sec |
ASTM D 4716 |
1x10-3 |
1x10-3 |
1x10-3 |
|
| Geotextile Properties |
GE160 |
GE180 |
GE110 |
| Fabric Weight, oz. |
ASTM D 3776 |
6.0 |
8.0 |
10.0 |
| Grab Tensile, lbs. |
ASTM D 4632 |
160 |
225 |
270 |
| Puncture, lbs. |
ASTM D 4833 |
95 |
130 |
165 |
| Water Flow Rate. gpm/ft2 |
ASTM D 4491 |
130 |
100 |
75 |
| AOS, US, sieve |
ASTM D 4751 |
70 |
80 |
100 |
| |
| 1. These values
represent minimum acceptable test values for an individual roll as tested
according to SKAPS Manufacturing Quality Control Manual. Individual test
specimen may vary.
2. Geonet properties are tested prior
to the lamination process. They cannot be tested on the final
product.
3. Transmissivity measured using
water at 20°C at a gradient of 0.1, under confining pressure of 10,000 psf,
between stainless steel plates. Values may vary between individual laboratories.
This information is provided for
reference purposes only and is not intended as a warranty or guarantee. SKAPS
assumes no liability in connection with the use of this information. Check with
SKAPS for current, standard minimum quality assurance procedures. |
|
|
For further information, please send
an e-mail to: teresa@espgeosynthetics.com
|
|
|
|
|
|
