Send To Printer

Geotextile Product Description Sheet
Skaps GT - 180
8 oz Nonwoven Geotextiles

SKAPS GT-180 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-180 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-180 conforms to the physical values listed below:

PROPERTY TEST METHOD UNIT M.A.R.V. (Minimum Average Roll Value)

Weight (Typical) ASTM D5261 oz/sy (g/sm) 8.0 (271)

Grab Tensile ASTM D4632 lbs (kN) 205 (.911)

Grab Elongation ASTM D4632 % 50

Trapezoid Tear Strength ASTM D4533 lbs (kN) 85 (.378)

Puncture Resistance ASTM D4833 lbs (kN) 130 (.578)

Mullen Burst ASTM D3786 psi (kPa) 400 (2756)

Permittivity* ASTM D4491 I/sec 1.4

Water Flow* ASTM D4491 gpm/sf (I/min/sm) 90 (3657)

A.O.S.* ASTM D4751 U.S. Sieve (mm) 80 (.180)

U.V. Resistance ASTM D4355 %/hrs 70/500

* At the time of manufacturing. Handling, storage, and shipping may change these properties.

PACKAGING

Roll Dimension (W x L) - Ft 12.5 x 360 / 15 x 300

Square Yards per Roll 500

Estimated Roll Weight - lbs 250

* At the time of manufacturing. Handling may change these properties.
This information is provided for reference purposes only and is not intended as a warranty or guarantee. SKAPS assumes no liability in connection with the use of this information.

Engineered Synthetic Products, Inc.
405 Hood Road - Lilburn, Georgia - 30047
Office: 770-564-1857; Fax: 770-564-1818
www.espgeosynthetics.com