Send To Printer
Geotextile Product Description Sheet
Skaps GT - 116
16 oz Nonwoven Geotextiles

SKAPS GT-116 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-116 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-116 conforms to the physical values listed below:

PROPERTY TEST METHOD UNIT M.A.R.V. (Minimum Average Roll Value)
Weight (Typical) ASTM D5261 oz/yd2 (g/m2) 16.0 (542)
Grab Tensile ASTM D4632 lbs (kN) 380 (1.69)
Grab Elongation ASTM D4632 % 50
Trapezoid Tear Strength ASTM D4533 lbs (kN) 145 (.644)
Puncture Resistance ASTM D4833 lbs (kN) 240 (1.07)
Mullen Burst ASTM D3786 psi (kPa) 800 (5512)
Permittivity* ASTM D4491 sec-1 0.7
Water Flow* ASTM D4491 gpm/ft2 (l/min/m2) 50 (2035)
A.O.S.* ASTM D4751 U.S. Sieve (mm) 100 (0.150)
U.V. Resistance ASTM D4355 %/hrs 70/500

* At the time of manufacturing. Handling, storage, and shipping may change these properties.

PACKAGING
Roll Dimension (W x L) - Ft 15 x 150
Square Yards per Roll 250
Estimated Roll Weight - lbs 250

* At the time of manufacturing. Handling may change these properties.

This information is provided for reference purposes only and is not intended as a warranty or guarantee. SKAPS assumes no liability in connection with the use of this information.

Engineered Synthetic Products, Inc.
405 Hood Road - Lilburn, Georgia - 30047
Office: 770-564-1857; Fax: 770-564-1818
www.espgeosynthetics.com